Product

Planibel G

The glass with a high performance low-e hard coating

Planibel G is a glass product that combines application of two layers of low emissivity, through CVD (Chemical vapor Deposition) process. These coatings are applied on one surface of the glass. Those two coatings reduces the heat transmittance therefore improve comfort

Features

>Low Emissivity Planibel G not only saves a considerable amount of energy, but it is also the easiest Low-E coated glass to process.
>The coating applied online using a high temperature (amlmost 600 C) adheres to the surface of the glass becoming remarkably durable
>With its super-hard coating Planibel G boasts several features, making it the ideal low emissivity glass for processors

Kind Of GlassThickness (mm)Standard Size(mm)
3.2 4 5 6 3210x2134 3210x2250* 5100x3210
Planibel G
Pure Low-E Glass
PNGFL 3.2, 4, 5, 6 3.2, 4, 5, 6 3.2, 4, 5, 6

* for export market only

>windows of high performance buildings (Office, Residential, etc)
>For all types of glass walls.

PLANIBEL G
Type
Of
Glass
Standard
Thickness
(mm)
Coating
Position
Energy Characteristic Light Characteristic Solar
Factor
(%)
Shading
Coeficient
*3*4
U
Value
W/m2k
Transmittance
(%)
Reflectance
(%)
Absorption
(%)
Ultra Violet
Transmission
(%)
Transmittance
(%)
Reflectance
(%)
 
 
 
Planibel G 3.2 #2 70 10 20 55 82 11 73 0.84 3.7
4 #2 68 10 22 53 82 11 72 0.83 3.7
5 #2 67 10 23 51 81 10 71 0.81 3.7
6 #2 66 10 25 47 80 10 70 0.80 3.7


Remarks :

  • - The data are calculated using spectral measurements that are confirm to standards NFRC 100 - 2010 and/or ISO/DIS 9050
  • - Energy properties according NFRC 100 - 2010 and/or ISO/DIS 9050
  • - U-Value (formerly k-value) is calculated according to standard NFRC 100 - 2010 and/or ISO/DIS 9050
  • - This document is no evaluation of the risk of glass breakage due to thermal stress. For tempered glass the risk of spontaneous breakage due to Nickel-Sulfide is not covered bt PT Asahimas Flat Glass Tbk. The Heat Soak test is available on request
  • - Specifications, technical and other data are based on information available at the time of preparation of this document and are subject to change without notice. PT Asahimas Flat Glass Tbk can not held responsible for any deviation between the data introduced and the conditions on site
  • PHOTOS APPLIED PLANIBEL G 6.jpg
  • PHOTOS APPLIED PLANIBEL G 2.jpg
  • 5.planibel G - Copy.jpg
  • 8395.jpg
  • 7902.jpg
  • 5.planibel G.jpg

FLAT GLASS GENERAL DIVISION

Jl. Ancol IX/5 Ancol Barat, Jakarta 14430, Indonesia.
Phone: 021-6904041 (8 lines)
Fax: 021-6918709, 69000470

amfg.marketing@agc.com

AUTOMOTIVE GLASS GENERAL DIVISION

Kawasan Industri Indotaisei
Sektor 1A Blok J-L, Cikampek 41373
Jawa Barat, Indonesia
Phone : 264 - 351711 (8 Lines)
Fax : 264 - 351710

asahimas.autosales@agc.com

HELPLINE SERVICE

If you aware about the action which has been done by someone related to the Company.